ATM35

Click on the picture below to get more information on atm35:

AUDIO TECHNICA - ATM35 HIGH-INTENSITY CARDIOID CONDENSER CLIP-ON INSTRUMENT MICROPHONE Buy Today @ The Sound Professionals, Inc.

MANUFACTURER'S WEBSITE

• Clips to brass, reeds, piano, acoustic bass, snare and toms
  
• Crisp, clear, well-balanced response, even at high SPLs
  
• Interchangeable elements available for hypercardioid and subcardioid polar patterns
  
• UniMount® clip permits accurate positioning while protecting element
  
• Operates on battery or phantom power
  
• Also available as:
  ATM35cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPak™ wireless systems

SPECIFICATIONS
ELEMENT	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	Cardioid
FREQUENCY RESPONSE	30-20,000 Hz
LOW FREQUENCY ROLL-OFF	150 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY	-45 dB (5.6 mV) re 1V at 1 Pa
IMPEDANCE	200 ohms
MAXIMUM INPUT SOUND LEVEL	145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	118 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	67 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	11-52V DC, 2 mA typical
BATTERY TYPE	9V
BATTERY CURRENT / LIFE	1 mA / 1000 hours typical
SWITCH	On-flat, on-roll-off (phantom) Off, on-flat, on-roll-off (battery)
WEIGHT (MICROPHONE)	0.3 oz (8.5 g)
WEIGHT (POWER MODULE)	5.4 oz (153 g)
DIMENSIONS (MICROPHONE)	1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter
DIMENSIONS (POWER MODULE)	3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D
OUTPUT CONNECTOR (POWER MODULE)	Integral 3-pin XLRM-type
CABLE	25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module
ACCESSORIES FURNISHED	AT8418 UniMount® instrument mount; AT8532 power module; soft protective pouch
AUDIO-TECHNICA CASE STYLE	M12

SPECIFICATION GRAPHS
Click on the chart to view the larger image
		POLAR PATTERN
		FREQUENCY RESPONSE

 

The Sound Professionals carry the widest selection and have the lowest prices on atm35.